Pioneer BDP-440 Mode D'emploi page 41

BDP-140_UCXCNSM_IBD_EN.book Page 41 Tuesday, July 19, 2011 10:54 AM
Setting Options
Digital Output Bitstream
PCM
Re-encode
Off
Downsampling 48k
96k
192k
DRC (Dynamic Range Off
Control)
On
* Only Dolby digital and
analog audio signals are
supported.
Auto
Color Space RGB
YCbCr
YCbCr 422
Full RGB
Auto
Resolution
480I/576I
480P/576P
720P
1080I
1080P
HDMI Audio Out Bitstream
PCM
Re-encode
Off
On
Control
Off
To use PQLS (BDP-440), Sound Retriever Link and Stream Smoother Link (page 17), Control must be set to On.
HDMI Deep color 30bits
36bits
Off
HDMI 1080P 24Hz On
Off
Auto
HDMI 3D
Off
3D notice Yes
No
Explanation
Select this to output digital audio signals directly.
Select this to output digital audio signals converted to PCM audio signals.
Select this to output digital audio signals converted to DTS Digital Surround.
Select this to output audio signals other than digital audio signals.
Select this when playing a disc recorded with a sampling frequency of 48 kHz.
Select this when playing a disc recorded with a sampling frequency of 96 kHz.
Select this when playing a disc recorded with a sampling frequency of 192
kHz.
Select this to output audio signals without using the DRC function.
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing HDMI, but Auto cannot be
selected.
Select this to output HDMI audio signals directly.
Select this to output HDMI audio signals converted to 2-channel audio
signals.
Select this to choose the type of audio signals automatically.
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 17.
Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
Select this when outputting the video signals with normal 24-bit color.
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
With 3D discs, the disc is played with 3D images.
Even with 3D discs, the disc is played with 2D images.
This sets whether or not to display the 3D notice when playing 3D images.
07
41
En