Eu Declaration Of Conformity - Mitsubishi Heavy Industries FD Serie Manuel De L'utilisateur

Table des Matières

DRED

■ This air conditioner complies with DRED standards as per AS/NZS4755.3.1. It supports demand response modes 1, 2

and 3 (DRM1, 2, and 3).

The outdoor unit of this air conditioner is equipped with a DRED-specifi c terminal block.

It also supports ELV(Extra-Low Voltage) as per AS/NZS60335.1.

Because the air conditioner is programmed to limit electrical power consumption when receiving the DRED input

signal, cooling or heating capacity may be reduced.

In DRED-enabled mode, a small "D" is displayed on the remote controller, as shown on the pictures below. When the

defrost cycle becomes active during DRED operation, touch screen controller continue to display the DRED active "D"

symbol.

However, the normal controller does not ; only "DEFROST" is displayed even though DRED mode remains active.

Display in DRED mode

RC-EX Series (From RC-EX Series)

RC-E Series (From RC-E Series)

Display in DRED mode during

Defrost operation

RC-EX Series (From RC-EX Series)

RC-E Series (From RC-E Series)

EU DECLARATION OF CONFORMITY

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD.

16-5 Konan 2-chome, Minato-ku,

Tokyo, 108-8215, Japan

Description of apparatus: Split Type Air Conditioner

Model name:

Conformity model list

[Indoor Unit]

Kx série Kxr série