Preface; Introduction; Technical Specifications - PLYMOVENT DUALGO Manuel D'installation Et D'utilisation

PREFACE

Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TiP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTiON
A remark with additional information for the user. A
remark brings possible problems to the user's
attention.
CAUTiON!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WARNiNG!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
CAUTiON!
Denotes risk of electric shock.
WARNiNG!
Fire hazard! Important warning to prevent fire.
WARNiNG!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by "-" (hyphen) concern enumerations.
Listings indicated by "•" (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
You can find these data on the identification plate.
Product indications
Unless specifically stated, the contents of this manual applies
to the DualGo as well as the DualGo
0000111692/150418/A DualGo
.
plus
1

iNTRODUCTiON

1.1 Identification of the product
The identification plate contains, among other things, the
following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2 General description
The DualGo is a stationary filter unit with a fan and two
extraction arms. It features a pre filter cassette and a HEPA
filter cassette (both disposable).
1.2.1 Intensity of use
The DualGo is suitable for occasional to regular welding
activities .
1
1.3 Options and accessories
The following products can be obtained as an option and/or
accessory:
- OL-250/FUA-4700 | Outlet transition from rectangular to
round Ø 250 mm
- OL-315/FUA-4700 | Outlet transition from rectangular to
round Ø 315 mm
- SAS-315 straight | Silencer (straight) Ø 315 mm
- SAS-315 elbow 90° | Silencer (elbow) Ø 315 mm
1.4

Technical specifications

DualGo
Physical dimensions and properties
Material (housing) electro-zinc coated steel
Weight (excl. arm) 125 kg (276 lbs)
Filters
Pre filter cassette:
- material polyester
- filter surface 1 m² (10.8 ft²)
- filter classification ISO Coarse 70%
according to ISO
16890
HEPA filter cassette:
- material glass fibre
- filter surface 26 m² (280 ft²)
- efficiency class E12 according to
EN 1822-1:2009
Washable no
Extraction arm
Type hose tube arm
(EconomyArm)
Length 2, 3 or 4 m
Diameter Ø 160 mm (6.3 in.)
Type
Weight (per arm)
EA-2
EA-3
EA-4
Fan
Fan type radial
1. approx. 1 coil of solid wire or 7,5 kg (16.5 lbs) of electrodes per workplace per
month
DualGo
plus
126,5 kg (279 lbs)
polyester
1 m² (10.8 ft²)
ISO Coarse 70%
according to ISO
16890
glass fibre
26 m² (280 ft²)
E12 according to
EN 1822-1:2009
no
metal tube arm
(KUA)
2, 3 or 4 m
Ø 160 mm (6.3 in.)
Weight Type Weight
11 kg KUA-2 13,5 kg
(24.3 lbs) (29.8 lbs)
13 kg KUA-3 17 kg
(28.7 lbs) (37.5 lbs)
15 kg KUA-4 18 kg
(33.1 lbs) (39.7 lbs)
EN - 3