Preparing The Telephone - switel DFT 817 Série Mode D'emploi

2 Preparing the Telephone

Safety information
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
Content
Base station (answering machine)
with power adapter plug
Charging station with power
adapter plug
Handset
Telephone connection cable
Power pack
Operating instructions
1
Visit www.switel.com to find out whether the telephone set is already
available.
82
DFT 817x model
1 1
8171 8172 8173
1 1 1
− 1 2
1 2 3
1 1 1
1 2 3
1 1 1
Connecting the base station
Attention: Position the base station at least 1 m away from other
electronic devices, otherwise there is a risk of mutual distur-
bance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Telephone line socket
1
8174
1
Mains power outlet
3
4
1
4
Attention: With regard to the base station with answering
machine, use the power adapter plug model No. VD060060I,
1
bearing the output data: 6 V, 600 mA.
Connecting the charging station
Connect the charging station
as illustrated in the diagram.
For safety reasons, only use
the power adapter plug sup-
plied.
Attention: With regard to the charging station, use the power
adapter plug model No. SY−06030−GS, bearing the
output data: 6 V, 300 mA.
2
Only applies to telephone sets with at least two handsets
. Checking the package contents" on Page 93.
Preparing the Telephone
2
Mains power outlet
93