Sharp MD-E9000H Mode D'emploi page 136

Editing a Recorded MiniDisc (continued)
To move a track
1
Press the MD button and load a MiniDisc (see page 15).
2
Whilst in the stop mode, select the track you want to move using
the 5/3 5/3 or 2/4 2/4 button. Or start playing the track and then
5/3 5/3 5/3 2/4 2/4 2/4
press the MD 06 06 button.
06 06 06
3
Press the NAME/TOC button, and within 10 seconds, select
"MOVE" using the 5/3
4
Within 10 seconds, press the MEMORY/ENTER button.
5
Select a new track position using the 5/3
To cancel the operation, press the MD
6
Press the MEMORY/ENTER button again.
The track is moved, and the unit is stopped at the beginning of the moved
track.
Notes:
When a track has been moved, the other tracks will be newly numbered automati-
cally.
This function cannot be used in the random play mode.
E-37
*07-E34-38-MD9000H(SEEG) 37
5/3 or 2/4 2/4 button.
5/3 5/3 2/4 2/4
5/3 2/4
5/3 or 2/4 2/4 button.
5/3 5/3 5/3 2/4 2/4 2/4
button.
To move programmed tracks (programmed
move)
1
Programme tracks in the desired order (steps 1 - 5, page 17).
2
Press the NAME/TOC button, and within 10 seconds, select
"PRGM MOVE" using the 5/3 5/3 or 2/4
5/3 5/3 5/3
3
Within 10 seconds, press the MEMORY/ENTER button.
To cancel the operation, press the NAME/TOC button or MD
4
Press the MEMORY/ENTER button again.
The tracks will be moved, and the unit will exit the programmed move mode.
Notes:
The tracks that are not included in the programmed selections will be put at the end
of the new track numbers.
If a track has been programmed more than once, the initial programme position will
have priority.
01.4.19, 3:09 PM
2/4 button.
2/4 2/4 2/4
button.