Emission Control - RedMax HE250F Mode D'emploi

Table des Matières

Publicité

( 1 )
( 2 )
( 5 )
6
( 3 )
( 4 )
( 6 )
English
3. Warning labels on the machine
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning! Danger of kickback.
(4) Beware of thrown objects.
(5) Warning/Attention
(6) Keep all children, bystanders and helpers 15
meters away from the stick edgers.
IMPORTANT
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
WARNING
Never modify your stick edgers.
We won't warrant the machine, if you use the
remodeled stick edgers or you don't observe the
proper usage written in the manual.
4. Symbols on the machine
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction A to close the choke
The direction B to open the choke
Position:
AIR CLEANER COVER

■ EMISSION CONTROL

An emission control label is located on the engine.
IMPORTANT ENGINE INFORMATION
*1
THIS ENGINE CONFORMS TO 2007
REGULATIONS FOR SMALL NONROAD ENGINES.
REFER TO OWNER'S MANUAL FOR MAINTENANCE,
SPECIFICATIONS AND ADJUSTMENTS.
COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 7HCPS.0254AD ; EM
DISPLACEMENT : 25.4cc
MANUFACTURED :
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
*1: The year will be changed every year of manufacturing.
*2: The initial number will be changed every year of
manufacturing.
U.S. EPA
*2

Publicité

Table des Matières
loading

Table des Matières