Emission Control - RedMax BCZ2601S Mode D'emploi

Masquer les pouces Voir aussi pour BCZ2601S:
Table des Matières

Publicité

6
English
3. Warning labels on the machine
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning/Attention
(4) Keep all children, bystanders and helpers 15
meters away from the brushcutter
IMPORTANT
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
WARNING
Never modify your brushcutter.
We won't warrant the machine, if you use the
remodeled brushcutter or you don't observe the
proper usage written in the manual.
4. Symbols on the machine
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER

■ EMISSION CONTROL

An emission control label is located on the engine.
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA PH2
AND 2006 CALIFORNIA EMISSION
REGULATIONS FOR SI SORE's.
COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 6KZXS.0254BG ; EM
ENGINE DISPLACEMENT : 25cc
REFER TO OWNER'S MANUAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED :

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bcz2601suBcz2601sw

Table des Matières