Table des Matières
Publicité
8
English
3. Warning labels on the machine
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning/Attention
(4) Keep all children, bystanders and helpers 15
meters away from the brushcutter.
(5) Keep hands away from cutting blades.
IMPORTANT
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
WARNING
Never modify your machine.
We won't warrant the machine, if you use the
remodeled machine or you don't observe the
proper usage written in the manual.
4. Symbols on the machine
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
■ EMISSION CONTROL
An emission control label is located on the engine.
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA PH2 AND 2005
CALIFORNIA EMISSION REGULATIONS FOR SI
SORE's. COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 5KZXS.0244XY ; EM
ENGINE DISPLACEMENT : 24cc
REFER TO OWNER'S MANUAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
MADE IN JAPAN
Publicité
Table des Matières
