Manner Of Delivery; Assembly - Vermeiren 2030 Mode D'emploi

3.2

Manner of delivery

The Vermeiren 2030 beds shall be delivered with:
 Head or front board, electric
 Foot or rear board, electric
 Head section electric
Without PVC-slat
With PVC slat
 Leg section, electric
Without PVC-slat
With PVC slat
 Set PVC-slat for mattress support platform
 Side railings
 Lifting pole + triangular grip
 Tools
 Instruction manual
The nursing bed may only be used with the parts listed here. If parts are omitted or if foreign
furnishings, components or electrical systems are included, then this bed is not regarded as
a nursing bed supplied by the manufacturer, and you use it at your own risk. Then the CE
conformity and the warranty of the manufacturer do not apply.
3.3

Assembly

L
WARNING:
Risk of injury - Check all star knobs, screws are secured before
using the bed.
L
CAUTION:
Chance of pinching - Do not place fingers between the components
(moving) of the bed.
Please take note of the following: It offers assistance in the assembly of your nursing bed.
3.3.1 Attachment head section and leg section
1. Loosen the star knobs of the head section a little bit  to make it easier to slide into
each other.
2. Slide the 2 sections of the mattress support platform, head section  and leg section
, into each other.
3. Retighten the star knobs . Check also that the star knobs of the leg section are firmly
secured.
(976D)
(976D)
(977D)
(977D)
(989C)
(968)
Page 14
2030
2017-05
Approx. 14,4 kg/piece
Approx. 14,4 kg/piece
Approx. 15,85 kg/piece
Approx. 17,65 kg/piece
Approx. 16,50 kg/piece
Approx. 19,20 kg/piece
Approx. 4,54 kg/15 pieces
Approx. 8,26 kg/piece
Approx. 7,45 kg/piece