Product Description; Intended Use - Vermeiren 2030 Mode D'emploi

1

Product description

1.1

Intended use

With the 2030 model, you have acquired a nursing bed that was developed entirely for your
comfort. This nursing bed offers a number of individual adjustment possibilities which are
explained below.
The nursing bed is designed for a single adult patient (from 12 years, up to maximum user
weight 135 kg).
The bed shall be used with a suitable mattress (min. RG 35, 120 mm thick, max. 20 kg).
The modular construction of the bed allows full use by disabled persons, elderly people or
during revalidation in home environment.
When providing for individual requirements:

body size and weight 135 kg

physical and psychological condition

residential circumstances

environment
should be taken into consideration.
The bed is suited for application environment 4 of ISO 60601-2-52: "care provided in a
domestic area where medical supervision is necessary and appropriate supervision is
provided or nursing care provided in a home environment where ME equipment is used to
alleviate or compensate for an injury, disability or disease".
Your bed should only be used on surfaces where all four wheels are touching the ground.
The bed should not be used as a ladder, nor is it a transport for heavy or hot objects.
When used on mats, carpeted floors or loose floor coverings, the floor covering can get
damaged and it is difficult to push over such surfaces (without patient).
Use only Vermeiren approved accessories. It is not permitted to combine the bed with other
products or equipment or other electrically driven appliances.
The manufacturer is not liable for damage caused by the lack of or improper service or as a
result of not following instructions from this manual.
Compliance with the user and maintenance instructions are an essential part of the
guarantee conditions.
Left and right references are to be understood when you lie on your back in the bed.
Page 3
2030
2017-05