Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. INSTALLING THE FRONT SHELF BRACKETS
Parts Required:
1
x
Front Shelf Bracket / Left (#22)
1
x
Front Shelf Bracket / Right (#23)
6
x
Screw (#A)
6
x
Washer (#B)
6
x
Locking Washer (#C)
Installation:
•
Attach one Front Shelf Bracket to the front of the Grill Barrel by using
three screws. Install each screw half-way, then tighten completely
when all three screws are mounted and aligned properly. Repeat the
same installation for the other Front Shelf Bracket.
8. MOUNTING THE FRONT SHELF
Parts Required:
1
x
Front Shelf (#24)
2
x
Screw (#I)
2
x
Nut (#E)
Installation:
•
From underneath, insert the screw (from the inside) into the Front
Shelf and the Front Shelf Bracket, then lock it with a nut. Repeat
From underneath, insert the screw (from the inside) into the fron
installation for the other side of the Front Shelf.
shelf and the front shelf bracket,then lock it with a nut.
NOTE: When installed correctly, the Front Shelf can be raised (for use) or
Repeat installation for the other side of the front shelf.
lowered (for storage) with ease.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
NOTE: When installed correctly, the front shelf can be raised (fo
weight of the unit will cause the shelves to break, which is not covered
and lowered (for storage) with ease.
by warranty.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
9. MOUNTING THE SIDE SHELF HANDLE, SERVING TRAY
weight of the unit will cause the shelves to break, which is not
Parts Required:
covered by warranty.
2
x
Serving Tray Handle (#9)
1
x
Serving Tray (#10)
1
x
Side Shelf Handle (#11)
4
x
Screw (#A)
4
x
Locking Washer (#C)
4
x
Washer (#B)
Installation:
•
Mount the Side Shelf Handle onto the Main Barrel using four screws,
locking washers, and washers.
•
Mount the Serving Tray Handles onto the Serving Tray using the two
pre-installed screws on each handle. Place the Serving Tray onto the Side
Shelf Handle. It will rest directly on the frame of the Side Shelf Handle.
Attach one front shelf bracke
IMPORTANT: Avoid using the side shelf handle to move or lift the
grill. The weight of the unit will cause the side shelf handle to bend
or break, which is not covered by warranty.
front of the grill barrel by
screws. Install each screw ha
9
Mount the side shelf handle onto the main barrel using four screws, locking washers, and
7
22
C B
A
8
E
I
Attach one front shelf bracket t
front of the grill barrel by usi
screws. Install each screw half-
24
tighten completely when all thre
are mounted and aligned properly
Repeat the same installation for
other front shelf bra
9
9
23
9
10
11
Publicité
Chapitres
Table des Matières
