Starting The Programme; End Of Programme; Switching Off - Miele professional PG 8055 Mode D'emploi

en - Operation

Starting the programme

Press the Start/Stop button (the LED of

the Start/Stop button will light up).
Programme sequence indicator
After the start of a programme, the wash
phase description and, for 10 seconds,
gramme running
are shown in the display.
During the programme sequence, the  and
 arrow buttons can be used to switch
between the wash phase, the set temperat-
ure and the actual temperature in the
second line of the display.
The time remaining is shown in the third line
of the display.
Universal
Main wash
Duration

End of programme

After a programme has ended normally, the
Start/Stop button's LED will go out.
Programme finished
The message
pear in the bottom line of the display.
Universal
Temperature
Programme finished
In addition to this, a buzzer will sound for
approx. 3 seconds (factory default setting).
To completely finish the programme, the
door must be opened fully with the com-
mercial dishwasher still switched on.
If the switch-off function is enabled, the
commercial dishwasher switches itself off
after a short period of time.
Press the  button to switch it on again.

Switching off

Press the  button until the LED in the

button goes out.
38
Pro-
G
23
Min
will ap-
55 °C