Warning And Safety Instructions - Miele professional PG 8055 Mode D'emploi

en - Warning and Safety instructions
Correct installation

Do not install this dishwasher in an area where there is a risk of explosion or freezing
conditions.

Be careful before and while installing the dishwasher. Wear protective gloves.

To ensure stability a built-under dishwasher must only be installed beneath a continuous
worktop that is bolted to the adjacent cabinetry.

In order to reduce the risk of damage from condensation, the furniture in the area
around the dishwasher must be designed for commercial use.
Technical safety

This dishwasher must only be commissioned, repaired and maintained by the Miele
Customer Service Department, a dealer or a suitably qualified service technician. Unau-
thorised installation, maintenance and repairs can cause considerable danger for the user.

Before using the dishwasher, check it for any externally visible damage. Do not use a
damaged dishwasher. This could be dangerous.

In the event of a damaged or leaking dishwasher, switch off at the power supply imme-
diately and call the Miele Customer Service Department, a Miele dealer or a suitably quali-
fied service technician.

Faulty components must only be replaced by genuine Miele original spare parts. Only
when these parts are fitted can Miele guarantee the correct functioning and safety of the
appliance.

The electrical safety of this dishwasher can only be guaranteed when correctly earthed.
If in any doubt, please have the electrical installation tested by a qualified electrician.

Please follow the advice on installation in these instructions and the separate Installation
diagram.

Before connecting the appliance, ensure that the connection data on the data plate
(voltage, frequency and fuse rating) match the mains electrical supply.

There must be no electrical sockets behind the dishwasher. There is a danger of over-
heating and risk of fire if the dishwasher is pushed up against a plug. See "Electrical con-
nection" in the main operating instructions for further information.

Do not connect the dishwasher to the mains electricity supply via a multi-socket unit or
an extension lead. These do not guarantee the required safety of the machine (e.g. danger
of overheating).

Warning. Do not open the casing of the dishwasher. Any contact with live connections
or tampering with the electrical or mechanical components of the dishwasher will en-
danger your safety and may lead to machine malfunctions.

The dishwasher must not be used if the electrical connection cable is damaged. A dam-
aged connection cable may only be replaced by a suitable connection cable of the same
type. For safety reasons, such replacement may only be carried out by the Miele Customer
Service Department or a qualified service technician.
26