Viscount Vivace 60 Deluxe - 60 - 50 Deluxe
2.3 THE SIDE PANELS
Other organ controls such as the volume controls, reverb adjustment and the graphic display showing all
the instrument's main setup and adjustment functions are located on the right and left of the manuals, in
easy reach of the organist.
To make use of these controls quicker and easier, all the rotary trimmers are on the left of the manuals,
with the graphic display and the relative control buttons on the right.
LEFT PANEL
GENERAL
REVERB
1
PEDAL
MAN.I
3
POWER
WARNING!
Do not switch the organ on and off in rapid succession. After the instrument is switched off, wait at
least 10 seconds before switching it back on.
RIGHT PANEL
1. Display: graphic display of 128x64 pixels for display of all
the screens relating to the organ's functions.
2. [FIELD ] and [FIELD ] buttons: buttons used to move
the cursor around within the display screens. The [FIELD ]
button moves the cursor to the field above (the one currently
selected) while [FIELD
3. [VALUE +] and [VALUE -] buttons: buttons for adjusting
parameters. [VALUE +] increases the value, [VALUE -]
decreases it.
4. [EXIT] and [ENTER] buttons: buttons for accessing or
exiting menu screens. [ENTER] is used to enter the menu or
function shown on the display or confirm any prompts from
the system. [EXIT] is used to exit the screen on the display
and return to the previous one, or abort any prompts from the
system.
1. [GENERAL] trimmer: regulates the organ's general
volume.
2
2. [REVERB] trimmer: regulates the level of the reverb digital
effects.
4
3. [PEDAL] trimmer: pedal board volume.
4. [MAN. I] trimmer: first manual volume.
5
5. [POWER ] Switch: the switch used to switch the organ on
and off.
] selects the field below.
48
Owner's Manual
1
+
FIELD
VALUE
2
-
FIELD
VALUE
3
ENTER
4
EXIT