Viscount Vivace 60 Deluxe Mode D'emploi page 49

Owner's Manual
4. [NEXT] and [PREV.] stops: general combination sequencers. [NEXT] selects combinations in
ascending order, [PREV.] in descending order.
5. [ENC] piston: pressing this piston activates the Enclosed function used to control the organ's general
volume using the swell pedal [MAN. II].
N.B.
When the Enclosed function is activated, the volumes of the first manual and pedal board are
immediately set in relation to the position of the [MAN. II] swell pedal. When the Enclosed function
is deactivated, the volumes of the above sections are immediately reset in relation to the position of
the [MAN. I / PEDAL] swell pedal.
6. [T] piston: piston used for switching the Tutti on and off.
The voice composition of the Tutti function is programmable. To set a new configuration, switch on
the stops and couplers of your choice, press [S], keep it pressed and then press the [T] piston or the
[TUTTI] foot piston (Vivace 60 Deluxe only).
7. [II] Piston (Vivace 60 Deluxe only): activates coupling of the second manual to the first (II/I).
8. [A.P.] piston: this piston controls the status of the Automatic Pedal function used to play the stops of
the pedal board using the first 32 notes of Man.I. In this case, the organ's pedal board is deactivated
and the stops become monophonic, with priority to the lowest note.
9. [MIDI I], [MIDI II] and [MIDI P] buttons: this section contains the pistons used to activate the
transmission of MIDI note codes on the [MIDI OUT] port (in the recess underneath the first manual)
in response to the notes played on the manuals. The LED of each piston displays the status of
transmission on the relative MIDI channel as follows:
o Piston illuminated: note code transmission enabled
o Piston off: note code transmission disabled
[MIDI I] controls transmission of the notes played on the first manual, [MIDI II] controls the notes
played on the second manual, and [MIDI P] the notes played on the pedal board.
N.B.
These pistons activate or deactivate the transmission of MIDI note codes (Note On and Note
-
Off) only, unlike all the other MIDI messages the organ is able to process, which are always
transmitted regardless of the status of this function.
- These pistons control transmission of MIDI notes only. Reception is always enabled.
10. [C] piston: Cancel piston, which switches off all the stops, tremulants, couplers and pistons on any
manual divisions active, then resets the general and dedicated HRs.
Viscount Vivace 60 Deluxe - 60 - 50 Deluxe
47