Upgrading The Operating System - Viscount Vivace 60 Deluxe Mode D'emploi

Viscount Vivace 60 Deluxe - 60 - 50 Deluxe Owner's Manual

9.3 UPGRADING THE OPERATING SYSTEM

Upgrading the organ's operating system requires use of a MIDI file (extension .MID) reader, by means of
which the data in the upgrade file can be transmitted to the organ. A hardware device used for MIDI
sequencing, or a computer software package capable of processing this type of file, may be used. Connect
the MIDI data output port of the transmitter device (which may be the MIDI OUT connector of a hardware
module or of a serial or USB / MIDI interface or Joyport if a computer is used) to the [MIDI IN] connector
of the Vivace.
Once the necessary connections have been made, switch on the organ keeping the [FIELD ], [VALUE
+] and [ENTER] buttons pressed. The display will show the screen:
in which the system informs you that the upgrade procedure has been recalled and it is awaiting data.
Now start reproduction of the .MID file on the transmitter device. If the connections have been made
correctly and the file used relates to the operating system upgrade, the display will start to show a percentage
of the data received.
At the end of the procedure, the following video page is displayed:
so switch the organ off and back on. If the following screen appears when the organ is switched on again:
the previous upgrade has been unsuccessful and the procedure will have to be repeated.
78