Horizon Fitness T101 Manuel D'utilisation page 14

ASSEMBLY STEP 3
HARDWARE FOR STEP 3
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
14
DESCRIPTION QTY
M8X1.25PX20L 4
8.2X15.4X2T
4
8.4X15.5X6T 4
RUNNING
DECK
CONSOLE CABLE
Open HARDWARE FOR STEP 3.
A
B Attach LEAD WIRE to bottom end of CONSOLE
CABLE. Pull LEAD WIRE through RIGHT CONSOLE
MAST (1). After pulling the lead wire through the
mast, the top of the CONSOLE CABLE should be
located at the top of the mast.
C With the RUNNING DECK in the raised position,
attach the RIGHT CONSOLE MAST (1) to the BASE
FRAME (2) using 4 BOLTS (A), 4 SPRING WASHERS
(B) and 4 FLAT WASHERS (C).
NOTE: Do not tighten bolts completely
until after the console is assembled.
A B C