Efco MT 7200 Manuel D'utilisation Et D'entretien page 12

en
WARNING: WE DO NOT REPRESENT AND YOU SHOULD NOT ASSUME THAT THE
CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK. DO NOT RELY
UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW
PROPERLY AND CAREFULLY TO AVOID KICKBACK.
Reduced-Kickback Guide Bar and Low-Kickback Chain
Reduced-kickback guide bars and low-kickback saw chains reduce the chance and magnitude of kickback
and are recommended. Repairs on a chain brake should be made by an authorized servicing dealer. Take
your unit to the place of purchase if purchased from a servicing dealer, or to the nearest authorized service
dealer.
WARNING: This chain saw is capable of severe kickback that could result in serious
injury to the user. Do not operate this chain saw unless you unless you have extraordinary
cutting needs and experience and specialized training for dealing with kickback. Chain
saw with significantly reduced kickback potential are available.
Use of bar and chain combinations other than those listed is not recommended.
WARNING : Do not mount a bow guide on any Efco chainsaw. The risk of kickback is
increased with a bow guide because of the increased kickback contact area.
Recommended bar and chain combination
MODEL
MT 7200 - MT 8200
MT 7200 - MT 8200
MT 7200 - MT 8200
MT 7200 - MT 8200
MT 7200 - MT 8200
MT 7200 - MT 8200
12
OPERATION
BAR PITCH
LENGTH CHAIN
20" 3/8" x .050"
20" 3/8" x .058"
24" 3/8" x .050"
24" 3/8" x .058"
28" 3/8" x .050"
28" 3/8" x .058"
GUIDE CHAIN
BAR P.N. TYPE
200RNDD009 72LPX072X
208RNDD009 73LPX072X
240RNDD009 72LPX084X
248RNDD009 73LPX084X
280RNDD009 72LPX092X
288RNDD009 73LPX092X
CHAIN
TYPE
72V072X
72V084X
72V092X