Sharp R-239-A Mode D'emploi page 133

IMPORTANT SAFETY INSTRUCTIONS
Do not use metal utensils, which reflect microwaves
and may cause electrical arcing. Do not put cans in the
oven.
Use only the turntable and the roller stay designed
for this oven. Do not operate the oven without the
turntable.
To prevent the turntable from breaking:
(a) Before cleaning the turntable with water, leave the
turntable to cool.
(b) Do not put hot foods or hot utensils on a cold
turntable.
(c) Do not put cold foods or cold utensils on a hot
turntable.
Do not place anything on the outer cabinet during
operation.
INSTALLATION
1. Remove all packing materials from the inside of the
oven cavity. Discard the loose polythene sheet from
between the door and cavity. Remove the feature
sticker, if attached, from the outside of the door.
Do not remove the protective film attached to the
inside of the door.
✓
REMOVE
R-239-A [07 EN].indd 3 R-239-A [07 EN].indd 3
✗
DO NOT REMOVE
132 /GB-3
NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal injury
resulting from failure to observe the correct electrical
connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and sealing
surfaces. This is a normal occurrence and is not an
indication of microwave leakage or a malfunction.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a flat, level surface strong enough
to support the oven's weight plus the heaviest item
likely to be cooked. Do not place the oven in a
cabinet.
4. Ensure there is a minimum free space above the
oven of 15cm:
5. Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
15cm
8/3/09 9:44:18 AM 8/3/09 9:44:18 AM