Technical Characteristics - Gima EOLO Mode D'emploi

Nébuliseur à piston

Masquer les pouces Voir aussi pour EOLO:

Mode d'emploi (39 pages)

Table des Matières

Les langues disponibles

14. Using the device in environmental conditions different than those indicated in this manual may harm seriously the safety and

the technical characteristics of the same;

15. The materials used to contain the drugs are made with highly stable thermoplastic polymers that are resistant against

chemicals. Such materials were tested with commonly used drugs (Salbutamol, Beclametasone dipropionate, Acetylcysteine,

Budesonide, Ambroxol) and no interaction phenomenon was observed. Interactions cannot however be excluded given the

variety and the continuous evolution of the drugs that are used. Remember to:

 To consume the drugs as quickly as possible after opening its package;

 To avoid keeping the drug in the tray-like container for too long and to clean it immediately after every application;

 If the tray-like container presents any abnormal situation (such as softening or cracks), do not introduce any solution and

do not proceed with the inhalation. Contact the technical service and describe the methods and type of drugs used.

16. Remember to:

 Only use this device with medicines prescribed by your doctor;

 Carry out the treatment only using the accessory indicated by the doctor according to the pathology.

Under certain failure conditions the temperature of the casing may become hot and there may be a risk

of burns if you touch those parts. In any case, the temperatures do not exceed the limit of 105°C (ref.

Interpretation Sheet IEC 60601-1).

Model

Typology (MDD 93/42/EEC)

Power Feeding

Power Consumption

Fuse

Max Pressure

Max Air Flow

Operating Pressure

Operating Air Flow

Neb-Rate (with 4ml of 0.9% NaCl solution)

MMAD

GSD

Weight

Size

Noise Level (measured as specifications of EN 13544-1)

Duty Cycle (to 40°C and 110% operating voltage)

Min Capacity Nebulizer

Max Capacity Nebulizer

Working Condition

Conservation condition and Transport

The manufactured cannot be held liable for accidental or indirect damages should the device be

modified, repaired without authorization or should any of its component be damaged due to accident

or misuse. Any minimal modification / repair on the device voids the warranty and does not guarantee

the compliance with the technical requirements provided by the MDD 93/42/EEC (and subsequent

changes) and its normatives.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC

DIRECTIVE 2012/19/UE-WEEE:

The symbol on the device indicates the separated collection of electric and electronic equipment. At the end of

life of the device, don't dispose it as mixed solid municipal waste, but dispose it referring to a specific

collection centre located in your area or returning it to the distributor, when buying a new device of the

sample type to be used with the same functions. This procedure of separated collection of electric and

electronic devices is carried out forecasting a European environmental policy aiming at safeguarding,

protecting and improving environment quality, as well as avoiding potential effects on human health due to

the presence of hazardous substances in such equipment or to an improper use of the same or of parts of the

same Caution: The wrong disposal of electric and electronic equipment may involve sanctions.