Dialling Pause - switel DET1172 Mode D'emploi

5.4

Dialling pause

In the case of private branch exchanges, it is necessary to dial a specific number (e.g.
9" or 0") in order to obtain the dialling tone for an outside line. When using some older
private branch exchanges, it takes a little time before the dialling tone becomes audible.
Particularly in the case of such private branch exchanges, it is useful to insert an automa-
tic pause after the number for the outside line so that the number can be dialled in a conti-
nuous process without having to wait for the dialling tone.
Between pressing the number for an outside line and the phone number required, press
the £ button once. P" appears in the display. After dialling the number for the outside
line, the telephone then waits 3 seconds before dialling the actual phone number.
The pause can also be entered with the phone number in the phone book.
5.5 Redialling
The telephone stores the last ten numbers dialled in a redialling list.
£
y or z, ƒ
If a phone number has been stored in the phone book, the name associated
with it appears in the display.
5.5.1 Deleting all the numbers from the redialling list
£
2 sec —, 
5.5.2 Deleting a number from the redialling list
£ , y or z
— , 
5.6 Calling back missed calls
The telephone stores the last ten calls in a calls log.
y or z
ƒ
5.7 Dialling phone numbers stored in the phone book
Phone numbers stored in the phone book (refer to Section 8.1) can be dialled quickly
and easily.
¤, y or z
ƒ
Phone book entries can be selected directly by opening the phone book and
entering the first letters of the entry required. Example: To access the number
for Peter", for example, press / once and use the y or z buttons, if
necessary, to select the stored entry.
5.8 Adjusting the receiver volume
The volume can be adjusted to one of five settings during a call.
y or z
5.9 Muting the microphone in the handset
—
The handset microphone can be switched on and off during a telephone call. This ena-
bles you to confer with a third party, for example, without the caller being able to hear you.
The handset loudspeaker, however, remains on; i.e. you can still hear the caller.
110
− Telephoning −
Open the redialling list (the last phone number
dialled appears in the display)
Select an entry and dial the number
Open the redialling list
Delete the entire list
Select the entry to be deleted
Delete the individual entry
Open and scroll through the entries stored
Dial the number
Open the phone book and select the phone book
entry
Dial the number
Press the button during the call
Switch the function on/off