Publicité
EMD64010
TOP COWLING RELEASE LEVER
The top cowling can be removed by oper-
ating the cowling release lever.
Pulling the front lever unlocks the top
cowling for removal.
When refitting the top cowling:
1) Set the top cowling straight down
onto the engine, being careful to
301023
avoid catching spark plug leads or
other wires.
2) Align the three cowling hooks with
the locks on the bottom cowling.
3) Press down on the top of the cowling
at the front and both sides of the back
until the three locks click.
4) To make sure the cowling is locked
properly push the cowling from each
side. If it lifts, repeat step 3.
cC
211013
Make sure the cowling lock connection
cable is operating correctly before rein-
stalling the top cowling.
8 When the release lever is operated,
both front and rear cowling hooks
should be released at the same time.
If not, adjust the cable adjuster for the
rear clamps.
8 Make sure the cable operates smoothly
and is free of corrosion.
8 Check that the cable is properly
secured in the holder.
8 When reinstalling the cowling, insure
that both the front and rear locks have
operated properly.
If the cowling has not been locked prop-
erly some parts may be damaged by the
top cowling shaking during operation.
2-16
GB
Publicité
Chapitres
