Tilt Support Lever; Trim Angle Adjusting Rod; Top Cowling Lock Lever - Yamaha F40C Manuel D'utilisation

F40/F50/FT50
F60
EMD43000*

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
000970
EMU01297

TRIM ANGLE ADJUSTING ROD

The position of the trim angle adjusting
rod determines the minimum trim angle
of the outboard motor in relation to the
transom.
000969
***-31*

TOP COWLING LOCK LEVER

To remove the engine top cowling, pull
up the lock lever. Then lift off the cowling.
When replacing the cowling, check to be
sure it fits properly in the rubber seal.
Then lock the cowling again by moving
the lever downward.
301011
EMU00162
TOP COWLING LOCK LEVER
To remove the engine top cowling, turn
the lock lever. Then lift off the cowling.
When replacing the cowling, check to be
sure it fits properly in the rubber seal.
Then lock the cowling again by moving
q
the lever upward.
001240
1 Top cowling lock lever
2-7
GB