Starting Signal Reception - ADE WS 1601 Mode D'emploi

Starting signal reception

As soon as the base station is supplied with current, all of
the indicators on the display will fade in for a brief mo-
ment. Furthermore, the display is briefly lit up and a beep
sounds.
The device then switches to receiving-mode, dur-
ing which the number of radio waves indicates
the quality of the reception: The more radio waves
shown on the display, the better is the reception.
While receiving, only the
buttons are deactivated during this time.
As soon as the signal has been received with sufficient
strength, the corresponding data and the radio-tower
symbol will be shown on the display. This process can last
a few minutes.
From now on, the weather station automatically switches
to receiving-mode multiple times each night. During this
process, the displayed time is compared with that received
from the time signal transmitter and, if necessary, correct-
ed.
If no sufficiently strong signal has been received, the
base station aborts the receiving process after a few min-
utes and the radio-tower symbol goes out. The receiving
process is started again at a later point in time.
‚ In this case, the time proceeds as usual (beginning
with the start time of "00:00").
‚ First check whether the location of the base station is
suitable, see "Choosing a location".
52
Weather Station with Wireless Outdoor Sensor WS 1601
button functions; all other