Fault/Remedy - ADE WS 1917 Mode D'emploi

Fault/Remedy

Fault
The DCF77 signal for
the time cannot be
received.
Temperature indication
of the outdoor sensor
appears too high.
The display shows
"H.HH" or "LL.L" instead
of the measured values.
The indicator is
illegible, the function
is unclear, or the values
are obviously false.
80
Possible cause
‚ Check the chosen location.
‚ Start the signal reception
manually, if necessary.
‚ Adjust the time manually.
‚ Check whether the sensor
has been exposed to direct
sunlight.
‚ The values lie above or below
the measurement range.
Reset the weather station to
the delivery state.
1. Remove the batteries from
the outdoor sensor and pull
the mains adaptor plug for
the base station out of the
socket.
2. Wait a moment.
3. Proceed as described in
"Start-up".
WS 1917 weather station