Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 128

Base station

The base station can only be operated with electricity.
In the event of a power failure, the storage battery only
ensures that the settings are saved for several hours and
are not lost.
Backup battery
The base station can also be operated without
a storage battery. However, operation with the
storage battery alone is not possible.
1. Use a coin or similar to open the battery compartment
on the back of the base station by turning the round
cover counter-clockwise as far as it will go.
2. Remove the lid.
3. Push the batteries against the contact springs under
the large, angular retaining tabs. The battery then
snaps into place under the side retaining tabs so that
the battery is firmly seated in its holder.
Pay attention to the correct polarity. The plus pole (+)
must point upwards.
4. Put the battery compartment cover back on and
turn it clockwise until it stops. Making the electrical
connection
NOTE on material damage
‚ Use only the supplied mains adaptor.
WS 1917 weather station
59

Publicité

Table des Matières
loading

Table des Matières