Connecting A Rear View Camera - Pioneer AVIC-F77DAB Manuel D'installation

Connection

Connecting a rear view camera

When this product is used with a rear view
camera, it is possible to automatically switch
from the video to rear view image when the
gearstick is moved to REVERSE (R). Camera
View mode also allows you to check what is
behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
! The screen image may appear reversed.
! The rear view camera is used as an aid to
keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for en-
tertainment purposes.
! Objects in rear view may appear closer or
more distant than in reality.
! Please note that the image area shown by the
rear view camera may differ slightly when full-
screen images are displayed when backing
and when checking the rear of the vehicle
while moving forward.
Rear view camera
(ND-BC6)
(sold separately)
To video output
Brown (BC IN)
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
For more details about the wiring, refer to Connecting
the power cord (2) on page 10.
Notes
! This mode is available when the rear view
camera setting is set to "On". (For details,
refer to Operation Manual.)
! Connect this product to the rear view camera
only. Do not connect to any other
equipment.
RCA cable
(supplied with ND-BC6)
This product
Power supply
Power cord
Engb
Section
02
21