ProMinent DULCO Trans 25/700 PVDF Mode D'emploi page 19

Technical data
Technical data
Part number
Pump type
Delivery rate*)
Pressure head max.
Viscosity max.
Temperature fluid
Density max. fluid
Immersion depth
Pump pipe diameter
Materials in contact with fluid
Pump housing
Shaft
Impellor
Mechanical seal
Seal
Hose
Tap
Hose connection
Hose clip
Barrel connector
Power motor
protected to
Voltage
Rated current
No-volt release
Overload protection switch
Speed Control
Cable
Colour motor
Colour top of motor
Weight
Dimensions (HxWxD)
*) Hose and tap adapted, water at 25°C
**) at 60 Hz the capacity is reduced by approx. 8 %
19
1036145
DULCO®Trans 25/700 PVDF
1260 l/h (motor, step 2)
5.4 m (motor, step 2)
< 150 mPas
< 60°C
< 1,2 kg/dm³
700 mm
25 mm
PVDF, Hastelloy C, ETFE, PTFE, FKM, PVC
PVDF
Hastelloy C
ETFE
without
without
PVC with fabric lining, 1,5 m, DN 13
PVDF, DN 13, nature
DN 13 for hose 13/18 mm
2 pieces, stainless steel 1.4301
without
230 W
IP 24
230 VAC; 1~; 50 Hz/60 Hz**)
1,2 A
without
with
2 steps
5 m, with Euro plug
RAL 2003 (orange)
no top
2,6 kg
927 x 197 x 83 mm