Publicité
Les langues disponibles
Les langues disponibles
Safety instructions, Description of Motor, Sound intensity level
Never operate the pump dry.
Do not expose the pump to the weather.
Clean the pump after each operation.
Never store the pump in areas in which corrosive
vapours exist.
Power supply must include a fault current breaker.
Dirt accumulation, high humidity or material damage on
the motor housing may lead to dangerous current surges.
In case of breakage or obvious damage of the housing
immediately stop the pump and repair it.
Non-compliance with the safety instructions may cause
injuries to the operator, pollution of the environment or
damage to the pump and the motor.
Description of the Motor
Internally cooled commutator motor with 2 speed switch and
overload cut-out switch
Overload cut-out switch
If the maximum power is exceeded the motor switches off.
After cooling down the motor can be re-started again by
actuating the ON/OFF switch.
Sound intensity level
T he sound intensity level of this pump is < 70 dB (A) (measured
on the manufacturer's pump test stand)
14
Publicité
