Publicité
Les langues disponibles
Les langues disponibles
Safety instructions motor, pump
Safety instructions Motor, Pump
In case of emergency remove the plug
The motor is not explosion-proof.
Never leave the pump unattended.
Do not operate the pump in hazardous locations.
Do not use the pump for transferring flammable liquids.
Only use the pump for its intended purpose.
The pump should be used in vertical position only.
Install the pump in a way which ensures that it cannot
fall into the container.
Regularly check the pump and the hose to ensure safe
operation.
Regularly check the motor according to the relevant national
safety instructions and/or rules for prevention of accidents
(in Germany these are e.g. BGV A3).
Secure the motor against unintentional starting.
The pump can start immediately after inserting the plug.
Before inserting the plug to the socket, ensure that the
2-step-switch is set to „0" (central position).
The motor starts automatically after a power failure.
The pump should not be immersed deeper into the liquid
than the outlet connection.
The pump should only be left standing in the liquid as long as in
operation.
Only use the pump up to max. 60°C liquid temperature.
Surrounding temperature: 0°C to +40°C
Keep the air escaping and the displacement in mind when
immersing the pump in the liquid. Lower the pump carefully.
Install appropriate splash guards for open barrels or containers.
Remove spilled liquid from the floor and dispose of it in an
environmentally sound manner.
Comply with relevant safety instructions.
Wear appropriate protective clothing
(face and breathing protection, protective gloves, etc.)
13
.
Publicité
