Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notice
Do not open or close the seat
with excessive force, or the seat
or toilet may break.
Open the seat and lid completely, otherwise when you let go, it could fall suddenly and hurt
you.
Please read the sheath instruction manual when putting the sheath on the seat. Note that
sheaths purchased by other manufacturers may not fit the seat.
If disposing of the product, do not throw away with your regular trash. Follow your local laws
and regulations to responsibly recycle the product.
How to remove/install the toilet seat and toilet lid
Remove toilet seat and toilet lid
Open the toilet seat and toilet lid
： Hold down the buttons at both ends
A - 1
A - 2
： Lift the toilet seat and toilet lid up
B
Attach toilet seat and toilet lid
： Hold down the buttons at both ends
A - 1
A - 2
： Attach the toilet seat and toilet lid to
C
the pin of the mounting plate
Maintenance
1. Periodic Cleaning
Wipe gently with a soft wet cloth.
2. Deep Cleaning
Use a neutral detergent (such as diluted dish soap) on a soft wet cloth to clean, then dry
with a soft clean cloth.
Do not use metal scrub brushes, steel wool, polishing powders, or detergents with gritty or
coarse particles.
Do not use bleach, chemical thinners, or products with acids or alkaline detergents.
Please note that bathroom chemicals and cosmetics can damage the seat.
Toilet seat specification
Length*width*height: 494mm*363mm*74mm(19.4in*14.3in*2.9in)
Weight: 3.4Kg(7.5Lb)
B
Button
A - 1
C
07
Do not expose the seat to
direct sunlight, or it may
become discolored.
View from below
A - 2
Pin of mounting plate
Publicité
Table des Matières
