Yamaha BRUIN 250 Manuel Du Propriétaire page 282

1. Bolt A (× 6)
1. Boulon A (× 6)
1. Perno A (× 6)
2. Bolt B (× 2)
2. Boulon B (× 2)
2. Perno B (× 2)
14. Start the engine, and then let it idle for seve-
ral minutes while checking it for oil leakage. If
oil is leaking, immediately turn the engine off
and check for the cause.
15. Turn the engine off, and then check the oil
level and correct it if necessary.
16. Install the footboard by installing the bolts,
and then tightening them to the specified
torque.
Tightening torque:
Footboard bolt A:
3.8 Nm (0.38 m·kgf)
Footboard bolt B:
6.5 Nm (0.65 m·kgf)
17. Adjust the brake pedal free play. (See page
8-67.)
8-29