To Pair The Remote Transmitter And The Receiver Collar - Petsafe PDT20-11939 Manuel D'utilisation

To Remove Dog 2 from the Remote Transmitter
Press and hold the +2 Boost button for 5 seconds.
Press the Right Lower button until the Dog 1
symbol appears on the Digital Display. Press +2
Boost to exit the menu.
_______________________________
To Pair the Remote Transmitter
Step
6
and the Receiver Collar
If your Receiver Collar does not beep when the Upper Left
button of the Remote Transmitter is pressed, or if you feel the
Receiver Collar is not responding to the Remote Transmitter:
1. With the Receiver Collar off your pet, turn the Receiver
Collar off.
2. Press and hold the On/Off button for 5 seconds.
3. The Receiver Collar will beep and the LED will fl ash.
4. Press any Transmitter button.
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not beep twice, please contact the
Customer Care Centre. For a listing of Customer Care Centre
telephone numbers, visit our website at www.petsafe.net.
Note: Pairing is for Dog 1 only.
16 www.petsafe.net