Petsafe PDT20-11939 Manuel D'utilisation page 15

Dog 2 Receiver Collar
1. With the Receiver Collar off your
pet, turn the Receiver Collar off.
2. Press and hold the On/Off button
for 5 seconds.
3. The Receiver Collar will beep and
the LED will fl ash.
4. Press Dog 2 the Upper Right or
Lower Right button.
5. The Receiver Collar will respond
and pair.
6. If the Receiver Collar does not beep
twice, please contact the Customer
Care Centre. For a listing of
Customer Care Centre telephone
numbers, visit our website at
www.petsafe.net.
____________________________________
Remote Transmitter Functions for Dog 2 Mode
Upper Left Button
Lower Left Button
Dog 1 +2 Boost
Upper Right Button Dog 2 Tone
Lower Right Button Dog 2 Stimulation Only
Dog 2 +2 Boost
Dog 1/Dog 2 Correction Levels
To change the correction level for Dog 1 or Dog 2, press and hold the +2
Boost button for 5 seconds. Both Dog 1 and Dog 2 correction levels will
appear. You can now use the Upper Left button to increase the correction level
for Dog 1 and Lower Left button to decrease the correction. For Dog 2, press
Upper Right button to increase the correction level and Lower Right button
to decrease. To lock the correction levels for Dog 1 and Dog 2, press the +2
Boost button.
Dog 1 Tone
Dog 1 Stimulation Only
Press +2 Boost and the Lower Left
Button simultaneously
Press +2 Boost and the Lower
Right Button simultaneously
www.petsafe.net
Button Functions
for Dog 2 Mode
Digital Dispay
Dog 1 Tone
Dog 1
Stimulation
Transmitter Antenna
Dog 2
Tone
Dog 2
Stimulation
+2 Boost
(see table below)
Charging Jack
(with cover)
15