Fitting The Side Panel (350Cb3 And 360Cb3 Only) - Dovre 350CB Installation Et Mode D'emploi

7. Fit the connection collar (C) to the flue gas
opening (D) using the two brackets supplied (E)
and the fixing materials (A) and (B); see the
following figure.
10
8. Use the supplied stove sealant to seal the
connection collar and the cover to the appliance.
Fitting the side panel (350CB3
and 360CB3 only)
If required, you can replace the side glass with a
closed side panel that is supplied as standard; see the
following figure for installation instructions.
In this case, the minimum distance between the side
and combustible material decreases from 80 cm to 40
cm.
Subject to change because of technical improvements