Installation Procedure - Toto TLM10 Manuel D'installation Et D'utilisation

CAUTION: RISK OF PERSONAL INJURY.
This valve DOES NOT provide automatic control of outlet water temperature.
The maximum water temperature should never exceed 110ºF (43°C).
1. Turn off the main water supply.
2. Connect the hot/cold water supply to the inlet, then connect to the
automatic faucet controller with supply hose.
Supply hose
Angle stop
(Hot)

INSTALLATION PROCEDURE

Mixing Valve
Automatic Faucet
Controller
Supply hose
3/8 Compression
3/8 Compression
5
Supply hose
Angle stop
(Cold)