Setting The Operating Mode And Power Level - HEBU medical HBS x-touch 300 argon Mode D'emploi

HBS x-touch 300 argon
7.8

Setting the operating mode and power level


Operating mode
HBS x-touch 300 argon has four different operating
modes for monopolar cutting and three for bipolar
coagulation applications (for details, see chapter 4.2
"
Overview of symbols for operating modes and settings
The selection of all modes takes place according to
the same principle. Touch the field showing the
operating modes. The selection menu then opens.
The required operating modes must be selected by
touching. To save and return to the main menu,
select the "Exit" field.

Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Menu example: Power setting
(MONO1- COAG)
When the unit is next switched on, the last used settings will appear. If you want to save individual
settings against changes the lock function can be used. For more information about the lock function
see chapter 7.9 and 7.10.
").
Menu example: Selection of operating modes
(MONO2 – CUT)
Use the arrow keys in order to set the required power
setting.
To save and return to the main menu, select the "Exit"
field.
EN
51