Setting The Operating Mode And Power Level; Saving The Program And Access; Switching Off; Operating Errors - HEBU medical HF 9501 Mode D'emploi

Table des Matières

Les langues disponibles

7.6

Setting the operating mode and power level

HBS 100 has four different monopolar modes an one for bipolar applications (for details, look chapter

4.2). The selection of all modes takes place according to the same principle:

of the operating mode must be pressed. The LED next to the button indicates the selected mode.

arrow buttons in order to set the required power setting.

Any change of settings of modes or power is automatically saved in the program in which you are.

To save individual settings first you have to select a different program. Therefore the button with the

program symbol must be pressed. Even after turning off and on again the device will keep these

values..

7.8

After terminating the operation, switch off the system at the main switch and pull out the plug.

After switching off the system, all electrodes and forceps must be disconnected from the cable and

the electrode cable from the unit.

7.9

Error

No.

HBS 100

the button with the picture

Use the

Table des Matières

Table des Matières

Hbs 100