Setting The Operating Mode And Power Level - HEBU medical HF 9509 Mode D'emploi

®
HBS x-touch 300 BiSeal
7.6

Setting the operating mode and power level


Operating mode
HBS x-touch 300 BiSeal
operating modes for monopolar cutting and three for
coagulation applications. Moreover the x-touch 300
®
BiSeal has four bipolar operating modes with the
operating mode BiSeal® (for details, see chapter
4.2 „Overview of symbols for operating modes and
settings"). The selection of all modes takes place
according to the same principle. Touch the field
showing the operating modes. The selection menu
then opens.
The required operating modes must be selected by
touching. To save and return to the main menu,
select the "Exit" field.

Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Menu example: Power setting
(MONO1- COAG)
When the unit is next switched on, the last used settings will appear. If you want to save individual
settings against changes the lock function can be used. For more information about the lock function
see chapter 7.7 and 7.8.
®
has four different
Use the arrow keys in order to set the required power
setting.
To save and return to the main menu, select the "Exit"
field.
Menu example: Selection of operating modes
(MONO2 – CUT)
EN
47