Introduction - HEBU medical HBS x-touch 300 argon Mode D'emploi

EN

1 Introduction

An electrosurgical unit is a generator used to transform electronic energy into high-frequency
alternating current (HF current).
If this current flows through human tissue, it creates heat which is used for cutting and for coagulation
of the tissue.
The HBS x-touch 300 argon is a versatile and compact electrosurgical unit which complies to a high
safety standard and unites economy with operative flexibility.
It offers the following application modes:
For monopolar surgical use
•
Pure cut
•
Blend cut
•
Polypectomy mode
•
Cutting in water environment (TUR)
•
Soft coagulation
•
Forced coagulation
•
Spray coagulation
•
Coagulation with argon
For bipolar use:
•
Bipolar Blend Cut
•
Bipolar Coagulation
•
Bipolar Cutting in water environment (TUR)
Benefits of the HBS x-touch 300 argon:

Simple, intuitive and safe operation

USB-connection for service

Current terminal for optional wireless foot switch, max. 0.5 A

Display-supported neutral electrode safety system helps interactively when applying the neutral
electrode

Nine storage locations for individual program settings

Two monopolar multifunction terminals for 3-pin standard or Martin plug, one terminal works witth
argon

AutoStop function for automatic interruption of the energy supply after a certain tissue resistance
level is reached.

Tone signal with scope for control of the volume, and an alarm tone in case of faults without facility
for switching off.

Coloured illumination of the LCD display in red, yellow, blue to indicate different operating modes
or error statuses

Facility for tracing output and impedance at the LCD display in the patient circuit on activation

Worldwide application possible through connection scope from 100 to 260 volts, 50 to 60 Hz
34
HBS x-touch 300 argon