C- Wiring / Installing; C1- Standard Installation; C2- Dimension Chart - SCS Sentinel SG2 Notice D'utilisation Et D'installation

C- WIRING / INSTALLING

C1- Standard installation

3
2
RX

C2- Dimension chart

Comply with the measures shown on the chart for proper installation. Adjust the gate structure to fit it for
best automation, if necessary.
Before starting the installation, please make sure that the gate moves freely and that :
1) Hinges are properly positioned and greased.
2) No any obstacle in the moving area.
3) No frictions between two gate leafs or and on the ground while moving.
4) Enough space is left when the gate is opening.
a. Distance perpendicularly from gate bolt to the front of fixing bracket #3.
b. Distance from the bolt perpendicular to the surface of articulated arm opener.
c. Distance between the position of arm fixation and the bolt.
d. Installation angle from full closed and full opened position.
Inside opening
A (mm) B (mm) C(mm)
50 50
50 100
100 50
100 100
150 50
150 100
200 50
200 100
D
650 90°- 100°
600 90°- 100°
640 90°- 95°
590 90°- 105°
630 90°- 95°
580 90°- 105°
610 90°- 95°
560 90°- 100°
4
Distance
de sécurité
+ 500 mm
minimum
1
1
2
3
3
4
2
TX
B
A
300 mm
maximum
24V DC blinker with
antenna
Photocells
2
24V DC gate opener
Remote control
EN
19