14. Supplied accessories
• Slip-on front lens cap
• Semi-soft case CL-L2 (with dedicated interior cushioning material)
• Dedicated slip-in filter holder
• Dedicated lens protective glass
• Strap LN-1
* The lens protective glass is attached to the lens when shipped. If dedicated accessories are
En
broken or missing, contact your nearest Nikon service center or representative office.
15. Optional accessories
• 52mm screw-in filters (except circular polarizing filter II)
• Slip-in circular polarizing filter C-PL1L
• AF-S Teleconverters (TC-14EII/TC-17EII/TC-20EII. The TC-17EII and TC-20EII do not provide
autofocus.)
16. Specifications
Type of lens:
Focal length:
Maximum aperture:
Lens construction:
Picture angle:
Focal length scale:
Distance information:
Zooming:
Focusing:
Vibration reduction:
Shooting distance scale:
Closest focusing distance: 2m (6.6 ft.) at all zoom settings in AF mode
Diaphragm:
Aperture scale:
Exposure measurement:
Focusing limit switch:
Tripod collar:
24
*
• Rear lens cap LF-1
• 52mm screw-in NC filter
• Dedicated lens protective glass case
G-type AF-S Zoom-Nikkor lens having built-in CPU and Nikon
bayonet mount. Special vibration reduction (VR) mechanism
incorporated
200 to 400mm
f/4
24 elements in 17 groups (4 ED glass), as well as 1 detachable
protective glass
12˚20'–6˚10' [8˚– 4˚ with Nikon digital cameras (Nikon DX format);
9˚50'– 5˚ with IX240 system cameras]
200, 250, 300, 350, 400mm
Output to camera body
Manually via separate zoom ring
Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave
Motor); manually via separate focus ring.
Lens-shift method using voice coil motors (VCMs)
Graduated in meters and feet from 2m (7 ft.) to infinity (∞)
1.95m (6.4 ft.) at all zoom settings in MF mode
Fully automatic
f/4–f/32
Via full-aperture method with cameras with CPU interface system
Provided; two ranges available: FULL (∞–2m), or ∞–6m
Rotatable through 360˚, lens rotating position index at 90˚, tripod
collar only detachable
• Lens hood HK-30