Network; Mail Report - Sony SRX-R110 Manuel D'installation

Time Server (NTP Server)
Enter the IP address of the NTP server.

Network

The Network window is used to configure the network
setting for the projector.
Internet Protocol (TCP/IP)
Sets the IP address of the projector.
Click either radio button.
Obtain an IP address automatically (DHCP): Click
when you obtain an IP address automatically from a
DHCP server.
Specify an IP address: Click when you specify a fixed IP
address. Sets the following items.
IP address: Enter the IP address of the projector.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS: Enter the IP address of a primary
DNS server.
Secondary IP address: Enter the IP address of a
secondary DNS server.
Ethernet
MAC address: Displays the MAC address of the
projector.
Speed: Sets the link speed of Ethernet. Select from the
drop-down list displayed by clicking

Mail Report

The Mail Report window is used to set sending e-mail to
report the used time of the projection lamps or the
operating hours of the projector for maintenance to the
preset addresses.
Report Timing
Lamp Timer Reminder: Presets the timing when e-mail
is sent for reporting the used time of the lamps.
Maintenance Reminder: Presets the timing when e-mail
is sent for reporting the operating time of the projector
for maintenance.
Re-count: Resets the operating time when you check the
check box.
Reporting Sources/Destination
FROM: Enter the e-mail address from which e-mails are
sent.
Email Address: Enter the e-mail addresses to which you
send e-mails as TO and CC.
Reporting Contents
Error: Check the addresses to which you want to send e-
mail for reporting errors.
Lamp Timer/Maintenance: Check the addresses to
which you want to send e-mail for reporting "Lamp
Timer" and "Maintenance."
Mail Server
.
Outgoing Mail Server (SMTP): Enter the SMTP
(sending mail) server name or the IP address of the
SMTP server.
Requires Authentication: Selects whether authentication
is required when you send e-mails.
If authentication is required, check the check box and
select either way for authentication.
POP before SMTP: Selects when "POP before SMTP" is
necessary when e-mail is sent.
POP3 Server: Enter the POP3 server name or the IP
address of the POP3 server.
Account Name: Enter the user name to log in to the
POP3 server.
Password: Enter the password of the user to log in to
the POP3 server.
SMTP Authentication: Selects when "SMTP AUTH" is
necessary when e-mail is sent.
11
GB
Setting Up the Projector