Setting Up The Projector; Displaying The Setting Window; Owner Information; Date & Time - Sony SRX-R110 Manuel D'installation

Setting Up the Projector

After installing the supplied SRX Controller in a computer
for controlling the projector, display the Control Function
Menu window, open the SETTING window, and set the
functions of the projector.
For details on the Control Function Menu window, see
page 20.

Displaying the SETTING Window

1
Click the SETTING button on the Control Function
Menu window.
The authentication dialog appears.
2
Enter the password in the Password text box, and click
the OK button.
The default setting of the password is "setting."
The SETTING window opens.
Setting items
3
Click the desired setting item on the left of the
window.
The selected setting window opens.
When you have completed the settings in each
window
Click the APPLY button at the lower part of each window.
The settings are registered.
10
GB
Setting Up the Projector

Owner Information

The Owner Information window is used to set information
on this projector.
Owner
Name: Enter the name of an owner of the projector.
Organization: Enter the name of an organization.
Projector
Region: Enter the region where the projector is used.
Location: Enter the location where the projector is
installed.
Name: Enter the desired name.
Memo: Use to enter notes.
Date & Time
The Date & Time window is used to set the current date
and time.
Time Zone
Sets the time difference in the area where the projector is
installed. Select the time zone from the drop-down list
displayed by clicking .
Adjust clock for daylight saving changes: When you
click the check box, the clock is automatically
adjusted according to the daylight saving time of the
selected time zone.
Date/Time
Clicking on the date text box displays a calendar. Set
the current date using the calendar.
To set the current time, click the hour or minute in the time
text box and set it by clicking .