Velleman CAMCOLD26 Mode D'emploi page 9

Menu: DAY&NIGHT
 AUTO: use this setting for cameras without IR-cut filter, or if you
want to switch the IR-cut filter off during the day. In this case, the
IR light is not filtered during the day, and colours may be
distorted by the IR light.
 EXTERNAL: standard setting. The camera uses the IR filter in day
conditions, and switches to a black and white image and switches
off the IR filter in night conditions.
 COLOR: the camera always works in colour mode with the IR
filter.
 B&W: the camera always works in black and white mode.
7.9 White Balance
Use this menu option to define the white balance adjustment. White
balance makes sure that white objects are always reproduced
correctly.
Menu: WB
The following white balance settings are available: AWB-PRO, AWB-
TEMPORAL, AWB-AI, AWB-SZ, AWB-GW, AWB-CCT.
Defining the optimal setting depends on the illumination conditions of
your particular environment. To find the optimal setting, try each of
the settings and select the one that gives the best results.
7.10 Zone Masking for Privacy
Use this function to block a part of the image where you do not want
to view activity. For example, if part of the image shows a public
area where recording may be illegal. You can define up to 8 areas.
Menu: ZONE MASKING
COLOR
V. 01 – 09/01/2015
CAMCOLD26/CAMCOLD26W
Select black, white or a colour for the mask, or
select MOSAIC for a mosaic effect in the masked
area.
9 ©Velleman nv