Velleman CAMCOLD26 Mode D'emploi page 11

AREA NO 0–3
7.12 Language
Use this function to set the language of the OSD menu.
8. Technical Specifications
IP rating
pick-up element
number of pixels
resolution
DSP
min. illumination
IR LEDs
max. IR projection distance
S/N ratio
electronic shutter
lens
V. 01 – 09/01/2015
CAMCOLD26/CAMCOLD26W
To define up to 4 areas. Select the desired area and
use the settings below.
 STATUS: select ON to activate the selected
detection area; select OFF to deactivate the
selected detection area.
 COLOR: set the colour of the detection area. The
outer edge of the area will flash in this colour
when the camera detects motion.
 HORIZON SIZE: set the
width [a] (in pixels) of the
detection area.
 VERTICAL SIZE: sets the
height [b] (in pixels) of the
detection area.
 HORIZON MOVE: sets the
distance (in pixels) from the
left side of the screen [c] for
the detection area.
 VERTICAL MOVE: sets the
distance (in pixels) from the
top of the screen [d] for the
detection area.
IP55
1/3" Sony Exmor CMOS image sensor
1305 (H) x 1049 (V) - PAL -
1000 TV lines
FH8520
0.01 lux / F2.0
36
20 m
> 50 dB (AGC off)
1/50 to 1/100 000 sec
2.8 - 12 mm
11 ©Velleman nv