If The Pdm Becomes Submerged In Water; If You Drop The Pdm - OmniPod CAT45E Guide De L'utilisateur

If the PDM becomes submerged in water

The PDM is not waterproof. Do not place it in water or leave it near
water where it can accidentally fall in. If it becomes submerged in
water:
1. Dry the outside of the PDM with a clean, lint-free cloth.
2. Open the battery compartment; remove the batteries and
discard them.
3. Use a clean, lint-free cloth to gently absorb any water in the
battery compartment.
4. Leave the battery compartment door open until the PDM is
thoroughly dry.
Never use a blow dryer or hot air to dry the Pod or
PDM. Extreme heat can damage the electronics.
5. Do not put in fresh batteries or attempt to use the PDM until it
has thoroughly air-dried.

If you drop the PDM

The PDM is built to withstand reasonable amounts of abuse, but
shock or a severe impact can damage it. If you drop the PDM or if
it is otherwise subjected to severe impact:
1. Inspect the outside of the PDM for visible signs of damage.
2. Press and hold the Power button to see whether the PDM
turns on and whether the LCD screen is damaged.
3. Inspect the inside of the battery compartment for visible
signs of damage.
4. Do NOT use the PDM if it appears damaged or is not working
as it should.
If you are unable to use your PDM to check your BG, have a back
up meter on hand to check your BG.
If your PDM is damaged or not working as it should,
please call Customer Care for assistance. Be sure to
check your blood glucose frequently. Remove your
Pod and contact your healthcare provider for
treatment guidelines to follow after you remove it.
If you require assistance, please call Customer Care.
Appendix
143