afx light SPOT10LED Manuel D'utilisation page 5

OPERATING INSTRUCTIONS
Navigation through the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD Display.
Button Function
<MENU> Used to access the menu or to return to a previous menu option
<UP> Scrolls through menu options in ascending order
<DOWN> Scrolls through menu options in descending order
<ENTER> Used to select and store the current menu or option within a menu
When a menu function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press <ENTER>.
MENU MAP
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
- Select via the control board.
- Select Addr menu then adjust the DMX address by using up and down buttons. After, press enter button to
validate your setup.
- Press the Mode/Esc-button in order return to the main menu.
DMX Mode
This LED moving head can operate in 4 DMX channels or 12 DMX channels
- Select via the control board.
- Select Chmd menu and select 4CH or 12CH. After, press enter button to validate your setup.
- See description of DMX table later
Run Mode
In the【Run】mode，you can chose【Master】mode and【Slave】mode.
Auto Play
With this function, you can run one of the 8 Inside program with master mode.
- Select via the control board.
- Select SHMd menu select one programs ( 001 to 008 ) in using Up and Down buttons. After, press enter
button to start the program.
- Press the Mode/Esc-button in order return to the main menu.
Sound mode
With this function, you can run the moving head by sound-controlled.
- Select via the control board.
- Select Soun menu and select Yes to enter in sound mode or No to stay in auto mode. After, press enter
button to validate your setup.
- Press the Mode/Esc-button in order return to the main menu
©Copyright LOTRONIC 2015 SPOT10LED Page 5