Sony HVL-F60M Mode D'emploi page 91

Details of MENU settings
Setting high speed sync [HSS]
Setting values: ON, OFF
• This flash unit is set to high-speed sync automatically when the shutter speed is
set faster than flash sync speed. Flash sync speed may differ depending on the
camera. For further details of flash sync speed, refer to operating instructions
supplied with your camera.
• Taking photos in bright locations is recommended.
• High-speed sync cannot be used with bounce flash.
• Using a flash meter or color meter with high-speed sync is not recommended
because it interferes with achieving the proper exposure and color.
• The flash range becomes shorter than that of normal flash photography when the
high speed sync is used. Make sure that the subject is in the flash range.
• You can also use the high speed sync with when using wireless flash
photography.
• If you select [OFF], high-speed sync is cancelled. When high-speed sync is
cancelled, the shutter speed cannot be set faster than the sync speed.
• The minimum power level setting changes depending on whether HSS is set to
ON or OFF.
– HSS setting ON: Can set to as small as 1/128
– HSS setting OFF: Can set to as small as 1/256
• For details on compatible camera models of this flash unit, visit the Sony
website in your area, or consult your Sony dealer or local authorized Sony
service facility.
Changing the wireless channel [WL CH]
Setting values: CH1, CH2, CH3, CH4
• Attach the flash unit to the camera and press the shutter button partway down
after changing the channel.
• For details on compatible camera models of this flash unit, visit the Sony
website in your area, or consult your Sony dealer or local authorized Sony
service facility.
91
GB