Sony HVL-F60M Mode D'emploi page 28

• Depending on the camera's flash mode, you may be unable to select a flash mode
even if it is not shown by a dotted line, and the screen may not change to the
normal indicator screen before the flash mode was changed.
• The MODE screen may change to the normal indicator screen due to some kind
of operation of the camera.
• As above, you cannot select [MR 1] or [MR 2] mode depending on the flash
mode saved in [MR 1] or [MR 2] mode.
• If TTL mode is selected, [TTL AUTO] appears on the normal indicator screen
when the camera is set to Autoflash and [TTL] appears when the camera is set to
Fill-flash.
– [TTL]
The flash unit always fires.
– [TTL AUTO]
The camera determines whether the flash unit fires.
28
GB